Free Classifieds at UKAdsList.com - View Item Content by ID 9135054
UKAdsList > Automobiles & Vehicles > SUVs & Trucks > Item ID 9135054
Item ID 9135054 in Category: Automobiles & Vehicles - SUVs & Trucks
Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.
Towing Airport baggage belt loader | |
Towing Airport baggage belt loader is mainly composed of the main frame, the load-bearing roller, the stainless steel slide frame, the driving roller, the driven roller, the adjusting roller, and the driving motor. The control switch and the emergency stop switch are equipped at the front and rear ends. The drive motor drives the belt to feed up and unload down through the drive roller. The driven roller and the adjusting roller can regulate the tension, skew and deviation of the conveyor belt. To enhance the structural strength, the main frame of the transmission frame adopts a channel beam structure. Buffer rubber blocks are installed at both the front and rear ends of the conveyor frame. The load-bearing rollers made of seamless steel pipes are durable. The driving and driven rollers adopt a variable cross-section structure, eliminating the factor of conveyor belt deviation and making it easy to adjust. Guide plates with a height of 100mm are installed on both sides of the conveyor frame to prevent luggage from sliding out of the conveyor frame. The left and right side baffles are movable and lower than the conveying surface when lowered. Technical Parameter Table of Towing Airport baggage belt loader The overall dimensions of the vehicle (length × width × height) in mm: 6900×1490×1650 Total vehicle weight kg: 2000 Minimum turning radius m: 7 Departure Angle ° : 8.5 Approach Angle ° : 12 Maximum elevation Angle of transmission beam: 30 ° The length of the transmission beam (mm) : 6600 The width of the transmission beam (mm) : 800 Belt width (mm) : 600 Transmission speed m/s: 0.16-0.5 Conveyor belt front end lifting range mm: 900-3745 Conveyor belt rear end lifting range mm: 485-1585 Minimum ground clearance mm: 150 Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China Tel: +86 21 50496068 / +86 21 50496058 / +86 400 9980 919 Mobile: +86 137 -6133 -5725 (As WeChat) +86-134 -7248 -8657 +86-195 -1651 -9903 +86-137 -7424 -8052 E_ mail: joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com  | |
| Related Link: Click here to visit item owner's website (0 hit) | |
| Target Nation: All Nations Target City : All Cities Last Update : 19 June 2025 8:17 AM Number of Views: 22 | Item Owner : aloo Contact Email: Contact Phone: +86 137 -6133 -5725 |
| Friendly reminder: Click here to read some tips. | |
UKAdsList > Automobiles & Vehicles > SUVs & Trucks > Item ID 9135054
© 2025 UKAdsList.com
USNetAds.com | GetJob.us | CANetAds.com | AUNetAds.com | INNetAds.com | CNNetAds.com | Hot-Web-Ads.com | USAOnlineClassifieds.com
2025-06-30 (0.334 sec)